UDP4000P-HDMI Dual Video IP KVM Extender

Dual HDMI digital extension for point-to-point or multi-point (many to many) matrix configurations over a single CATx cable:

 

UDP4000P-HDMI Dual Video

Introduction

The UDP4000P-HDMI-Dual KVM extender provides perfect dual High Definition Video up to 1920 x 1200 @60Hz per HDMI video port over a single CATx cable at approximately 150m with USB keyboard & mouse, two spare USB, Audio, RS‐232 and IR remote control.

 

Video connectivity is through HDMI (DVI-D connectivity option with HDMI-DVI adaptor cable) on the transmitting side, with HDMI (DVI-D connectivity option with HDMI-DVI adaptor cable) support on the remote user side.

 

This digital extension solution is based on standard UDPIP technology allowing unicast (point‐to-point) or multi‐cast (one‐to‐many) through a 1Gig Ethernet switch. Due to multi-cast features, the UDP4000P-HDMI can also be used in a multi-source video wall or even a surveillance centre.

 

Features Include

  • Supports Full HD video resolutions up to 1920x1200 @ 60Hz, and below, per port
  • Seamless interconnectivity between single and dual video UDP series models
  • Up to approximately 150m over CAT5, CAT6e or CAT7
  • IP based technology supporting unicast (point‐to‐point) or multi‐cast (one‐to‐many) through a 1Gig Ethernet switch
  • Support for many‐to‐many group broadcasting or multi-user KVM matrix ** 1Gig Ethernet Switch must support at least IGMPv2 as a minimum
  • Multi-user KVM matrix mode : On Screen Display (OSD) listing all attached systems
  • Matrix Manager is built into each user station – no external matrix manager required
  • Supports two USB HID ports for Keyboard and Mouse and two USB ports compatible with : USB touch screen, media stick, jogger wheel, tablet
  • 3.5mm Audio jack for microphone in and audio out, RS‐232 and IR connectivity
  • Encoder/Decoder engine with Scalar Function for video wall displays with 180, 270 Rotation

Datasheet: UDP4000P-HDMI Dual Video IP KVM Extender