Intelligent Power Strips and In Line Units
Unite Technologies provide a wide range of standard and custom power strips, as an integral part of our integrated solution to provide a modular and flexible solution for the local and remote monitoring and management of today's power and energy requirements where zero down time and maximisation of operations are a pre-requisite.
Accurately measuring critical power and energy information in real time, our range of power strips monitor True RMS Volts and RMS Amps, kVA, kWHr, Power Factor and Frequency. The data is displayed locally via a 16 character x 2 row digital LCD, whereby the information enables the individual electrical supply phases to be correctly balanced, helping prevent infrastructure failure.
Monitored Only Power Strips
- Non-invasive' real-time local and remote monitoring of non-intelligent power strips, rated up to 32A, via the CL-Amp.
- Available in 10, 13, 16, 32 and 64 Amp load ratings.
- Custom made to any size.
- Standard 1.2mm mild steel with matt black powder coating. Optional colours are available.
- Rated voltage at 230V, AC Nominal, rated current up to 64A, AC and rated frequency of 48 Hz to 62Hz.
- Individually fused sockets with optional power on neon indicators.
- Sockets angled for optimum cable dressing.
- Optional circuit breaker (32A / 16A). Allows all outlets to be isolated at the power strip.
- Can be vertically or 19" rack mounted.
- Supports up to 24 outlets per strip, compatible with C13, C19, Shuko and UK13A.
- Fully shrouded MCB switches to remove the possibility of accidental switching.
- Communicates via serial data link to control device.
- 0 to +45 degrees Celsius operating temperature.
- Rear or straight cable entry.
- Combine with any one of our family of Sinetica branded monitoring and control devices to gain further power features.
Monitored and Controlled Power Strips
As per the above including:
- Optional remote power cycling of up to a maximum of 24 individual outlets. Sequential power-up protects against current in-rush.
- Security for outlet switching provided by password protection.
- Combine with PowerHawk², Hawk-i², Hawk-i³, Eagle-i for network SNMP or web based control.
In-Line Units
(Any combination of single and three phase units are available with single or dual feed)
- Specifically designed for devices requiring one or more direct power feeds.
- Single and three phase solutions.
- Three Phase In-Line units provide 3 serial feeds. Each phase is measured independently.
- Single or dual fed.
- 1U, 2U or 3U 19", ETSI horizontal rack mounting.
- Available in 16 and 32 Amp Single Phase and 64 Amp Three Phase options.
- Integrated, scalable and modular solution.
- Rated voltage at 230V, Single Phase or 415V, AC nominal Three Phase.
- Rated current up to 32A, Single Phase or up to 64A, Three Phase.
- Rated frequency of 48 Hz to 62 Hz.
- Local LCD and remote monitoring of volts, amps, kVA and kWh.
- 0 to +45 degrees Celsius operating temperature.
- Fully featured management platform.